Hampson Posted December 29, 2015 Share Posted December 29, 2015 Hi Peter yes I remember the pub don't know what it is now I spent a few hours in there when it was a pub it is sad no Tempered Springs at the back of it they made a lot types of coil springs its all gone now Brian Link to comment Share on other sites More sharing options...
PeterR Posted December 29, 2015 Share Posted December 29, 2015 (edited) Hi Peter yes I remember the pub don't know what it is now I spent a few hours in there when it was a pub it is sad no Tempered Springs at the back of it they made a lot types of coil springs its all gone now Brian I know how you feel Brian . I live 100 miles away from Sheffield now, but visit family, friends and old places there around once a month. I'll try to have a look at the pub when I'm next nearby. It's sad that the old places have gone, but we still have memories and photos As a sales representative in the early '70s selling industrial floor maintenance equipment for 'Kent Panda', a subsidiary of 'Izal 'on the 'Newton Chambers' site at Chapeltown, I once called on a firm on the right hand side of Warren Street just off Attercliffe Road nearest the Norfolk Bridge end. Not 100% sure it was Tempered Springs but certainly in the steel industry. I dealt with, I recall the works manager, Keith Riley on that occasion who told me that Bob Precious worked there too, I think as a director or so I was told. My point is that they both had worked in the Progress and Planning office with me when I was the office junior in 1959 at Firth Browns. A long shot, but did you know either of them?? They would be knocking 80 if still with us. Peter. Edited December 30, 2015 by PeterR Link to comment Share on other sites More sharing options...
Hampson Posted December 29, 2015 Share Posted December 29, 2015 No Peter don't know them guys the nearest guys I new was my foreman and Engineer Brian Link to comment Share on other sites More sharing options...
PeterR Posted December 30, 2015 Share Posted December 30, 2015 (edited) Thanks Brian, knew it was an off chance. Peter. Edited December 30, 2015 by PeterR Link to comment Share on other sites More sharing options...
Cazzerb65 Posted January 5, 2016 Share Posted January 5, 2016 Don't forget there are still steel forges up and running in Sheffield, such as Thos C Wild Ltd., IFA., Abbey Forge, Alcoa (Firth Rixson Forgings). Try their websites for info also :-) Link to comment Share on other sites More sharing options...
A wilson Posted February 10, 2016 Share Posted February 10, 2016 Yes there are several forges still in operation, and many still employed in the steel industry, like my father. however it is a shadow of its former glory. Link to comment Share on other sites More sharing options...
elgoog44 Posted March 9, 2016 Share Posted March 9, 2016 My Dad worked in steel till it went belly up, he worked in Sheffield First then settled at a job in Guest and Grimes http://www.rotherhamweb.co.uk/h/guestchrimes.htm He was a mould Master, then like most he had to find out who would employ and he became a night security guard like a lot did, Still working now and in his 70's. One of the memories I have is the heat as you were on the bus going down Brightside lane you could feel how hot the furnaces where just from the road, now all memories, some good some bad, but never forgotten. Link to comment Share on other sites More sharing options...
juliehoward Posted October 22, 2016 Share Posted October 22, 2016 Loved reading this. I am writing novel about Sheffield in the 60's.... I don't know very much about working in the steelworks only stories my dad told, so this is all fantastic. I'm looking for nicknames people used... or any stories. Loved learning about the swing grinders... omg what a terrible job. http://www.sheffieldforum.co.uk/images/smilies/help.gif What other jobs, stories, nicknames do you have? Cheers Julie Link to comment Share on other sites More sharing options...
stpetre Posted October 24, 2016 Share Posted October 24, 2016 When I graduated from university back in the late 60s, I couldn't find a job that fitted my qualifications in the UK. So, for a few months, to keep body and soul together, I worked in a machine shop just off the bottom of the Moor. The layout was that of a yard, surrounded by walls in which the various processes took place. My job was to dip the threaded ends of bolts one by one into a bucket of liquid plastic then set them out to dry. I wish I could remember the name of that firm. Opposite it was a shop that sold dripping cakes and egg and bacon sandwiches. Anyone any idea what firm it may have been? I'd probably recognize the name. Might that firm have been 'Tyzack's' ? Link to comment Share on other sites More sharing options...
CF8M Posted October 24, 2016 Share Posted October 24, 2016 Hi! Julie, Seems my additional thread did not get through, it was some further comments about Nick-Names but no matter. What I have noticed was that on an earlier post about 1960's Radio you made some comments. I don't know if you are aware of this item on You Tube called 'Sunday dinner- Radio memories'. I found it just browsing but its amazing! Its just as I remember. You ought to watch it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now