Jump to content

VAGCOM VCDS in Sheffield or Rotherham??


Recommended Posts

the one on gumtree is a clone, and locks up the minute you try and update it, (please use the disc provided lets you know its never going past release 11.11.3) personally I wouldn't use something that could potentially corrupt the whole ecu and/or the module you are interrogating and with no back up support to help you, you are potentially looking at a big bill!. I have the genuine vcds which I have used on a daily basis and is an awesome tool currently on release 12.12.2

Link to comment
Share on other sites

Yeah, i've seen them, too good to be true at £40, when every single garage i've asked, they don't have it just the snap on, even those claiming to be specialist in sheffield...would you be able to do some coding for me then if i came up to you mg16?

Link to comment
Share on other sites

yes can do them, but there is no guarantee disabling cold check will keep the bulb warning off. xenon w/o shutters straight forward if its a highline spec ccm, as its on or off, if its midline spec the module has to be upgraded to highline spec via a change of the long coding (no parts needed) then it can switch off the shutters, seat belt chime is straight forward, not sure about one touch locking (do you mean anti-hijack)

Link to comment
Share on other sites

yes can do them, but there is no guarantee disabling cold check will keep the bulb warning off. xenon w/o shutters straight forward if its a highline spec ccm, as its on or off, if its midline spec the module has to be upgraded to highline spec via a change of the long coding (no parts needed) then it can switch off the shutters, seat belt chime is straight forward, not sure about one touch locking (do you mean anti-hijack)

 

So when my dealer told me it was impossible to kill the seat belt chime on my Volvo (850, so long time ago) he was lying?

Link to comment
Share on other sites

Dealers can do it, but i doubt they would as its a safety feature

i dont have any bulb out errors, just the leds flash every time i turn ignition on, well ignore the xenon without shutters, just turning cold check off, seatbelt chime off, and the one touch unlock is when you press unlock once and all doors open, i find it annoying only driver door opening..i'll message you now mg16

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.