telboy1 Posted February 13, 2016 Share Posted February 13, 2016 hi can anyone help i have fitted a cruise stalk to my corsa d 1.4 sxi 2008 i think it needs to be programmed to the bci unit thank you terry. Link to comment Share on other sites More sharing options...
remapper Posted February 13, 2016 Share Posted February 13, 2016 I think you have to programme the ipc/ecu variant configuration to cruise control "present" and the bcm also has to be programmed to cruise control "present" and you will need the "car pass" to do the bcm programming. Link to comment Share on other sites More sharing options...
telboy1 Posted February 13, 2016 Author Share Posted February 13, 2016 thank you for your reply i have had opcom done. but im not sure if iT needs the extra wire from stalk to bcm . i will pay to have this done if you can help regards terrry. Link to comment Share on other sites More sharing options...
remapper Posted February 14, 2016 Share Posted February 14, 2016 (edited) In that case you may need to run a wire from pin 20 on the column switch module connector, to pin 41 of the bcm connector (under bonnet). Edited February 14, 2016 by remapper typo Link to comment Share on other sites More sharing options...
telboy1 Posted February 14, 2016 Author Share Posted February 14, 2016 ok thanks i still think i will try and find someone to sort it for me regards terry. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now