Hera Posted March 24, 2017 Author Share Posted March 24, 2017 My Mondeo 2004 : one where you unlock - or not - the bonnet with the ig key : a-clock - lift - clock lift . Flat battery - needed to go to Sheff : so put the charged battery / leads near the front . Key - no effect : Internet brains told me this is a common story : worse case scenario - car pick up / mechanic brought out , new grille/lock / labour ... - can cost 300 quid - plus .. and no contribution from the lunatic designers - . It cost me £15 and a lot of work : strongly advise anyone at risk to take preventative measures now . The problem , was of course , that metal met plastic and the metal , eventually won : bad design . I had to cut the grille in half , at the bonnet front : have used the plastic rod with the Phillips end , rammed a large dia. nail into the other end , put a plastic sleeve on to keep the Phillips end engaged and used a radiator key on the nail's other end - made into a square . Replaced the 6mm bolts - dome headed , needed slots cut in to remove - - with new ones : this latter might be an idea as a preventative : would then be accessible through holes cut in the plastic. Link to comment Share on other sites More sharing options...
area 51 Posted March 24, 2017 Share Posted March 24, 2017 Nothing wrong with the mechanism or design. They need to be lubricated at least once a year, unfortunately they get neglected. Thanks for the info ,i had better oil mine tomorrow its starting to get a bit dodgy.Ill get the GT85 spray out. Link to comment Share on other sites More sharing options...
Hera Posted March 25, 2017 Author Share Posted March 25, 2017 Thanks , presumably , to me removing a battery lead , the , "entertainment unit " now requires a code . ! ? Link to comment Share on other sites More sharing options...
alchresearch Posted March 27, 2017 Share Posted March 27, 2017 You can ask on the Honest John website, they'll give you the code there. Link to comment Share on other sites More sharing options...
Seanjohn27 Posted March 27, 2017 Share Posted March 27, 2017 I had the same problem, when I took original unit out the code was written on the topof unit... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now